Viton Rubber Sheet
FKM / FPM or fluoroelastomers are used in a wide variety of highperformance applications. Long term reliability, with minimum change to the environment are the main factors that make fluoroelastomers a vital polymer. 100% virgin viton a compound - 66% fluorine content Very good chemical resistance Excellent hydrocarbons resistance, either aliphatic, aromatic or chlorinated Good impermeability to gases Excellent air resistance Exceptional high temperature resistance Excellent ozone resistance Excellent resistance to acids and alkalis including oxidant The heat-resistant properties far outlast nitrile rubber and other general-purpose elastomers Often used in aerospace, automotive and aircraft engineering for bonded seals, radial lip seals, caulks, coatings, vibration dampeners, expansion joints, gaskets, o-rings, piston seals, custom shape.
Thickness (mm) |
Roll Size (m) |
Lead Time |
---|---|---|
1 | 1.2 x 10 | 3-5 Days |
1.5 | 1.2 x 10 | 3-5 Days |
2 | 1.2 x 10 | 3-5 Days |
3 | 1.2 x 10 | 3-5 Days |
4 | 1.2 x 10 | 3-5 Days |
5 | 1.2 x 10 | 3-5 Days |
6 | 1.2 x 10 | 3-5 Days |
8 | 1.2 x 5 | 3-5 Days |
10 | 1.2 x 5 | 3-5 Days |
Temp range - '-20 to +250 (upto +315 intermittent)
Compression set - 22hrs @ 175 deg c = 55%
Specific gravity - 1.85 g/cm3
Elongation @ break - 165%
Tensile strength - 7mpa
Low temp brittleness - na
FDA - no
WRAS - no
Food safe (ec no 1935:2004) - no
Once the user has seen at least one product this snippet will be visible.