Neoprene Sheet
Black neoprene (10% content) / SBR rubber 70 shore. It is used where a cheaper quality material will suit in simple applications such as packing pieces, dust seals, protection pads etc where the material is not coming under any duress and slight resistance is required. this product is fully CE, PAH, ROHS, REACH compliant. Seals, hoses and gaskets are made from neoprene rubber sheeting and are often used with refrigerants and oils, both animal and vegetable. Neoprene rubber sheeting is also used to provide noise isolation in power transformers and as a base for adhesives. Its resistance to burning has led to it being used as weather stripping for fire doors.
Available Finishes: 'SS' has a smooth finish on both sides, 'CC' has a cloth-print finish on both sides and 'CS' has a smooth finish on one side and a cloth-print finish on the other.
We stock a majority of these strip materials at all times, so the likely lead time will be between 1 and 2 days. However, should we not hold the specific product required, we'll be able to provide within 3-5 days. Get in touch to discuss any specific requests.
Thickness (mm) |
Roll Width (m) |
Roll Length (m) |
Weight (Kg/M2) |
Finish |
Lead Time |
|---|---|---|---|---|---|
1 | 1.4 | 10 | - | SS | 1-2 Days |
1.5 | 1.4 | 10 | 2.18 | SS | 1-2 Days |
2 | 1.4 | 10 | 2.9 | SS | 1-2 Days |
3 | 1.4 | 10 | 4.35 | SS | 1-2 Days |
4 | 1.4 | 10 | 5.8 | SS | 1-2 Days |
5 | 1.4 | 10 | 7.25 | SS | 1-2 Days |
6 | 1.4 | 10 | 8.7 | SS | 1-2 Days |
8 | 1.4 | 5 | 11.6 | SS | 1-2 Days |
10 | 1.4 | 5 | 14.5 | SS | 1-2 Days |
12 | 1.4 | 5 | 17.4 | SS | 1-2 Days |
15 | 1.4 | 5 | 21.75 | SS | 1-2 Days |
20 | 1.4 | 5 | 29 | SS | 1-2 Days |
25 | 1.4 | 5 | 36.25 | SS | 1-2 Days |
Resistant to moderate chemicals and acids, as well as fats, greases and oils. Good ozone, oxygen and UV resistance. Neoprene is a very hardy material. However, the presence of strong oxidizing acids and esters will cause degradation. Ketones and chlorinated, aromatic and nitro hydrocarbons are also not suitable for use with neoprene rubber.
Material: cr 10% / sbr polymer content 10%
Density: 1.45sg
Hardness: 70 shore a
Tensile strength: 40 kg/cm2
Elongation at break: - 200%
Min temperature: -30 deg c
Max temperature: +90 deg c
Abrasion resistance: na
Once the user has seen at least one product this snippet will be visible.