Single Hump Silicone Hose


Silicone Single Hump Hose designed to connect metal pipe work and components, in systems using water and ethylene glycol based coolants.

Silicone hoses designed to connect metal pipe work and components, in systems using water and ethylene glycol based coolants. Designed for use in coolant systems on trucks, buses, passenger cars, generators, railway engines and many other vehicle and industrial applications where connections are required between rigid or flexible metal pipes.

They are ideal for joining pipes of similar or differing diameters with reducers. Good physical and chemical compatibility with coolant and corrosion inhibitors. For conveyance of oil and fuel, a fluorosilicone liner is required (FSH).



This hosing variety comes in blue.


ID (mm)

Length (mm)

Wall Thickness (mm)

Burst Pressure Rating (Bar)

Expected Burst Pressure (Bar)

Working Pressure (Bar)

No. of Ply

Lead Time

50.8

152

5.0 min.

9.2

16

3.07

5

5 Days

63

152

5.0 min.

7

13

2.33

5

5 Days

76

152

5.0 min.

5.5

12.5

1.83

5

5 Days

89

152

5.5 min.

4

9.5

1.33

6

5 Days

102

152

5.5 min.

3.6

7.6

1.2

6

5 Days

127

152

5.5 min.

3

6.2

1

6

5 Days

140

302

5.5 min.

2.6

5.4

0.86

6

5 Days

152

302

NA

NA

5

NA

6

5 Days

Material specification:

Silicone compound - not suitable for oils and fuels

Tested to bs903 at pressed cured for 5 minutes at +115.

Hardness (ihrd) 65 + 5

Density (g/cm3) 1.26 + 0.03

Tensile strength (mpa) 7 min

Elongation at break (%) 200 min

Tear strength (kn/m) 11 min

Compression set (%) 18 max

Temp range - '-50 deg to +180 deg

Reinforced fabric: Yarn: fine mesh 100% polyester

Thickness: 0.56mm

Weight: 190gsm +/ - 17gsm

Burst pressure: 16bar (232 psi)

Tensile strength: 75-80 kgf

Standard colour is blue but other colours are available. All hoses to meet or exceed sae j20r1 class a.