Felt 40 Sheet

Extra firm felt 40 density pressed felt (also known as technical felt, industrial felt, fulled felt, woolfelt). Manufactured by blending, pressing, fulling and drying, to produce a non-woven homogenous mat of fibre, which can exhibit a wide variety of properties depending on the final hardness, thickness and blend of wool used in its make-up.

Used in the manufacture and cutting of anti-vibration pads, bearer felts, grease and oil seals, gaskets, filter pads, fluid wicking. A fibrous structure which can absorb and transmit fluids along capillary pathways and filter out solids or suspended liquids in gases (i.e. mists). A homogenous structure in that, if the surface is removed, it is replaced by a similar face without fraying.

All felt sheet is available per linear metre (1m minimum order).

Thickness (mm)

Roll Width (mm)

Colour

Lead Time

3

1620

Off White

1-2 Days

5

1620

Off White

1-2 Days

6

1620

Off White

1-2 Days

8

1830

Off White

1-2 Days

9

1530

Off White

1-2 Days

12

1530

Off White

1-2 Days

15

1530

Off White

1-2 Days

Easily shaped by cutting or (in higher densities) machining and dimensionally stable in use, with minimum swelling and shrinking. Operational over a wide temperature range. it maintains its properties over a range from -40 celsius to +100 celsius. 100% wool felts exhibit self extinguishing properties and have a flash point over 450 celsius.

Other properties include a good response to oxidation, ultra violet exposure (i.e. ageing) and non polar solvents. Wool felt offers a near constant coefficient of friction in both wet and dry conditions.

Material - wool (97% wool min)

Weight - 390-440g/mm2

Temp range - -40 deg to +100 deg

Tolerance - BS4060:2006 table 6 6.1

Specification - BS4060:2006 DIN 61200, a97/3w

Flamibility - self extingushing

Storage - off floor level, kept dry and in sealed bags at room temperature