Felt 36 Sheet

Firm felt 36 density pressed felt (also known as technical felt, industrial felt, fulled felt, woolfelt). Manufactured by blending, pressing, fulling and drying, to produce a non-woven homogenous mat of fibre, which can exhibit a wide variety of properties depending on the final hardness, thickness and blend of wool used in its make-up.

Used in the manufacture and cutting of anti-vibration pads, bearer felts, grease and oil seals, gaskets, filter pads, fluid wicking. A fibrous structure which can absorb and transmit fluids along capillary pathways and filter out solids or suspended liquids in gases (i.e. mists). A homogenous structure in that, if the surface is removed, it is replaced by a similar face without fraying.

All felt sheet is available per linear metre (1m minimum order).

Thickness (mm)

Roll Width (mm)

Colour

Lead Time

3

1800

Grey

1-2 Days

6

1800

Grey

1-2 Days

9

1800

Grey

1-2 Days

12

1800

Grey

1-2 Days

Used for the manufacture and cutting of anti-vibration pads, bearer felts, grease and oil seals, gaskets, filter pads, fluid wicking.

Grey firm industrial felt is a clean pressed woollen felt manufactured to British standards. This product is not dyed grey, it is manufactured from natural grey wools and presents as a fawn/taupe hue. Designed to tighter tolerances on thickness and density than soft and medium felts, there's a much greater degree of friction resistance and used in more extreme sealing, closing, wicking, and anti-vibration applications.

Material - wool (97% wool min)

Weight - 340-380g/mm2

Temp range - -40 deg to +100 deg

Tolerance - BS4060:2006 table 6 6.1

Specification - BS4060:2006 DIN 61200 a97/6g

Flamibility - self extingushing

Storage -off floor level, kept dry and in sealed bags at room temperature